The Insider’s Guide To Arlo Base Station 1(855) 979-6456

Gone are the days when camera users need to keep a check on the monitor they have connected their cameras with. With long wires and bulky cameras, the overall set up task became neck-breaking for users. But with the passage of time, technology has introduced us with small, handy and smart devices that simply require a plug and play to operate. In this regard, one can approach the Arlo camera, which has become #1 choice for users all across the world. Plenty of models to choose from, the company, Netgear, has left no stone unturned to cater to multiple user’s requirements. 

Arlo Base Station

What Makes Arlo Camera Best Amongst All? 

With every Arlo camera you bought, you get a base station with it. A base station is a significant part of any surveillance system. It not only connect your cameras to the home router but also strengthens its battery backup. But due to some technical glitches like Arlo Base Station Offline, Arlo Camera Is Offline, etc, one cannot proceed further. It can occur due to several reasons like you may not have been properly connected it or there might be some synchronization issue. To fix them, you need to apply some important DIY method is given in the manual guide or by connecting with an expert technician. 

What is Arlo camera Offline Issue?

At times Arlo camera shows offline when you fail to connect it with the base station. No LED’s on the base station and the camera will blink if the synchronization process gets failed. Until you connect the base station to the device, you won’t be able to kick start with. Therefore, carrying out the troubleshooting method with the earliest possible time is a must. The issue of Arlo Device Offline is a critical one and hence the steps you apply must be done in a proper manner. 

Arlo Device Offline

Best practices to troubleshoot Arlo Offline issue

Don’t freak out by seeing your Arlo camera in the offline mode. We have rolled out some best troubleshooting method tips to fix the issue. Try each method subsequently and get an ultimate resolution. 

Base Station Reboot:- Rebooting the base station can prove to be advantageous and to do so, simply unplug the power socket and reconnect it. If you see a solid green LED on the base station, it means the base station is successfully connected. 

Power Adapter:- Make sure the power adapter is properly connected from both ends. 

Reset Base Station:- To start with the beginning, you can simply reset the base station which will eventually put it into the default mode. 

Note:- Make sure to apply the reset method after applying both the above-given method. Take it as a last option to perform. 

When nothing works, you have the best option to contact the customer care service of the company. No need to surf the internet, read manual guides in quest of getting the troubleshooting tricks instead, you can simply dial the toll-free number of experts and ask them for instant support. They are round the clock available at your service. For further details, give us a call on the toll-free number we have given here. Dial +1-888-399-0817 and stay tuned with Arlo Security Camera.