Enhance your Camera’s Productivity with Arlo Base Station

Arlo Base Station is a device that allows the secure connection of Arlo and Arlo Pro cameras. It enhances the battery life of your camera and also provides long-range connectivity. Arlo base station has a local USB storage backup with a smart alarm. Whenever you install a new Arlo camera, you need to connect it to the router. 

Arlo Base Station enables the wire-free operation of the Arlo camera. First, you require to connect it to the router with an ethernet cable. Then, connect the power adopter to the base station and turn it on. Wait till the LED turns solid green. This process may take up to 2 minutes. When LED turns solid, it shows that your Arlo Base Station now connected with the Internet. This is all you need for an Arlo Base Station Setup. This process is required before setting up or installing an Arlo Device.

Arlo Base Station

More About Arlo Base Station Offline

Arlo base station needs to be On when we connect our Arlo cameras. While syncing it, it sometimes gets off, resulting in the disfunction of the camera. The LEDs on the base station goes off, indicating that it is not working. The glowing LEDs on it show the active status of the base station. 

Troubleshoot Base Station Issue with these points 

Apply these methods to fix  Arlo Base Station Offline Issue. 

Reboot it:- Rebooting the base station can refresh its machine and may resolve it. Sometimes, a simple reboot proves to be a better solution. 

Check Internet Connectivity:- Your internet connectivity should be fast and smooth to avoid such a hassle. Hence, ensure that you are having a good internet connection. 

Reset Arlo Base station:- When you tried all the steps but didn’t get any result then you can reset the base station and put it at its default mode. From this point, you can again attempt to synchronize it. 

Arlo Camera Offline

Contact Tech Experts to Fix Arlo Camera Offline Issue

If you are unable to fix Arlo camera offline issue by DIY method then you can simply talk to the tech-experts who are ready to serve you with the best services. There is not any need to call your friend or any local vendor as a simple mistake turns out to be hazardous. Hence, it is better not to take any preventive methods without a tech expert’s help. To connect with the, you can simply make use of the phone number we have mentioned over here. When you call us, the tech-expert will ask you about your concern, forwarding your call based on that. To know more about the Arlo base station issue, you can contact us anytime at this number 1 855 979 6456 by dialing or through chat.  

Troubleshoot Arlo Camera Offline Issue With This Helpful Guide

Arlo is one of the most popular wireless security cameras in the US. It offers various product models to cater to various requirements including indoor and outdoor. Although, there is a list of common issues that turn out to be the hurdle for Arlo camera users. Amongst all the common issues, Arlo Camera Offline is one such issue that needs to be addressed as soon as possible in order to get it fixed. In this guide, we have curated troubleshooting methods to fix this issue as soon as possible.

Note: If you are a tech-novice and find difficult to follow it then you can reach us by dialing the toll-free number.

Arlo Camera Offline

Role of Arlo Base Station

A base station is the most significant part of a surveillance system. It connects your camera to the home wifi network and lets you access live-videos on your smartphone. There are several other benefits of deploying it as well which include enhancement of the camera’s battery life, long-range connectivity, etc.

Know more about Arlo Camera Offline Issues

When we try to configure it with the base station, it goes offline, due to which it deprives Arlo setup. The LED on the camera doesn’t emit, resulting in offline issues. To sort this issue out, there are several majors that can be taken. Below in this article, you can find them in brief.

Reasons behind Arlo Security Camera Offline Issue

While syncing the Arlo base station, we may miss out to perform several steps or technical glitches that can also be a major reason. To know them in brief, kindly read the points we have given below.

1. Slow internet speed:- A slow internet speed can possibly cause why the base station fails to connect.
2. Improper camera configuration:- Make sure that you have followed the right steps given in the manual guide, otherwise, things can go in the wrong direction.
3. Router Firmware Update:- Router the firmware update can also be a reason behind it. To fix this issue in short the span of time, one needs to update it with the help of a tech-expert.

 Steps to fix Arlo Offline Issue

The best way to fix Arlo Device Is offline issue can be rectified by following the troubleshooting steps.

1. Reboot base station:- Rebooting the base station can get you rid of this issue.
2. Check power adapter:- Check your power adapter if it is connected or not.
3. Check ports 443 and 80:- Ensure that both the ports are properly connected.

 Note:- You can also reset Arlo base station by pressing the button located at the back of the router.

Reset Arlo Base Station

Dial Arlo Support Number for Instant Camera Solutions

We have a team of dedicated experts, working round the clock to resolve issues with handy solutions. One can instantly get in touch with us, by dialing the toll-free number or also if you don’t want to connect via call then the live-chat option is best. The experts we have in our team are proficient with the knowledge of technical devices and their ins and outs. Fixing major technical glitches is just a child’s play for us. One can simply contact us by visiting our website 247CameraHelp.

Steps You Need To Perform To Sync Arlo camera Or Install Arlo Camera

Arlo has gained immense popularity in recent times as the brand offers plenty of wireless security cameras that precisely cater to various requirements. The range of wireless cameras it offers has helped camera users pick a chosen one according to their needs. It also helps them monitor their premises in the easiest possible way. No hassle of wires and cords, simply keep it at the desired place, install Arlo camera and you are done. In this guide, we have thrown some lights on how a user can configure and install its camera. We have concluded a solution to fix the technical halts that may come across while operating the camera.

Install Arlo Camera

What awesome features do you avail after Arlo Installation?

We have listed out its awesome features which compels every user to choose it over other brands.

Wire-free connectivity:- Arlo is known for its wire-free connectivity, no use of wires and cords. Simply install it and put it into a functioning mode within a few minutes.

Free app:- Download its free app and operate the camera at your fingertips. Whether you want to configure the camera or operate it, it comes handy in every task.

Night vision:- Arlo camera is equipped with night vision feature, which enables it to record footage in the darkest of light. You can access those videos through the Arlo application.

Siren:- A siren is inserted inside the camera which alerts you when it detects any kind of suspicious activity under its focal zone.

Cloud storage:- Arlo gives free cloud storage space to save the recorded videos, making it accessible for you to watch later.

 

Sync Arlo Camera

What is the process to install and setup Arlo camera?

In order to install and setup Arlo camera, one can follow the steps we have given below.

Note:- To avoid any hassle during the process, you can follow the below-given Arlo installation process carefully.

1. Open battery box, slide battery door and insert the batteries in proper alignment.
2. Get your camera near the base station and start to Sync Arlo Camera.
3. To sync it. Press the sync button of both the camera and base station at the same time. Continue pressing it for 10 seconds.
4. Greenlight will blow once the synchronization gets completed.
5. You will see blue LED blinking on the camera if in case, you don’t see it then either repeat the process or call tech-experts.
6. If you see the Amber color it means that synchronization gets unsuccessful. Make sure to complete the process as it is quite crucial.
7. Now, check the camera LED if it turns solid green or not? If it turns solid green, it means that the sync process is complete.
8. The process can be repeated for each Arlo camera.

    Now that you know how to install Arlo perform a camera, it will become easy for you to manage and customize everything. If you get stuck in Arlo Camera Sync process and need quick assistance then you give us a call. The experts are round the clock available to assist potential users in resolving their issues. For further details, contact us now.